| Quantity: | |
|---|---|
The multi-person double-sided operation clean workbench arranges operating positions on both sides of the equipment, and the filtered air at the top passes downward through the work area. According to the needs of multi-person collaboration, process connection or material handover, Aili Industrial plans the areas for people, workpieces, tools and materials on both sides to match the wide working area with the vertical air flow direction.
Operation form |
Airflow direction |
Workstation layout |
Support |
|---|---|---|---|
Multi-person two-sided operation |
Top vertically downward |
Wide workstations or collaboration areas |
Size, structure and function customization |
Determine the effective width of each workstation based on the number of people on both sides, workpiece size and tool occupancy range, and arrange a shared tool area and material temporary storage area.
Continuous processes need to clearly define the handover location to reduce cross-station movements of personnel and mutual interference between tools. When multiple people operate the same workpiece together, the station position, fixture and workpiece movement path need to be checked.
According to the number, arrangement and air duct structure of the filters configured in the long work area, check the air supply performance on both sides, the middle and near the filter joints.
The actual air flow at each workstation is related to the filter layout, internal air ducts and workpiece shielding. It needs to be checked based on different positions and cannot be judged only by the total air volume.
Check the total table load, local concentrated load and support spacing together. For wider workpieces, the fixing and moving positions of the fixture and load changes during operation should be clarified.
The countertop material, surface treatment, fixed interfaces and support methods can be configured according to the process, taking into account load-bearing, cleaning and daily maintenance.
Check the effective filtration area, filter resistance, air duct loss and operating wind speed together, and then determine the number of fans and drive configuration.
Related filtering products can be viewed HEPA and ULPA filters , confirm efficiency, sealing and maintenance methods according to project requirements.
Evaluate unified operations or zoning controls based on how workstations are used. The zoning function requires corresponding air supply structure support, and the impact of different opening combinations on adjacent workstations should be checked.
The specific plan should be confirmed together to match the control method with the air flow organization, detection conditions and actual use process.
After the air passes through the primary filter, it is sent into the filtration system by the fan, then passes through the high-efficiency filter at the top and end, passes downward through the operating positions on both sides, and leaves the work area along the designed path.
Air enters → primary filter → fan air supply → top high-efficiency filtration → multi-station vertical air supply on both sides → air discharge
Workpieces, instruments, and personnel movements may block vertical airflow, and particles generated by operations may also affect adjacent locations. Placement and handover should be planned according to the actual operation, and the airflow performance in key operating areas should be checked.
project |
Configuration instructions |
|---|---|
Product form |
Multi-person double-sided operation clean workbench |
operating position |
Multiple people operating on both sides of the work area |
Airflow direction |
The top blows air downward vertically |
Number of workstations |
Determined according to process, personnel spacing and effective operating width |
Work area size |
Configure according to workpiece, tools, materials and operating range on both sides |
effective working depth |
Combining airflow coverage with actual workpiece position confirmation |
clean target |
It can be configured according to the ISO level 5 work area target, and accepted according to the agreed particle size and testing status. |
Filtration system |
The primary effect is matched with the top-end high-efficiency filter, and the quantity and arrangement are determined according to the plan. |
Wind speed and uniformity |
Confirm according to process requirements and check the positions of different workstations on both sides |
Countertop support |
The total load, local load and support spacing are checked according to the project |
fan drive |
Configure according to air volume, resistance, air duct and control requirements |
Control method |
Unified operation or partitioned control supported by architectural design |
Process interface |
Sockets, wiring holes, tooling fixation and equipment interfaces can be configured as needed |
Overall machine size |
Determine based on transportation, approach, installation and maintenance space |
Power and power |
Confirm according to selected configuration and actual operating conditions |
Test items |
Wind speed, particle concentration, filter leak detection and electrical inspection are carried out as agreed. |
Filter efficiency and work area cleanliness are different indicators, and equipment performance needs to be confirmed through complete machine testing.
Multi-person collaborative assembly |
Precision component inspection |
Wide workpiece handling |
Optical component assembly |
|---|---|---|---|
Connection of processes on both sides |
Material handover processing |
Tooling and equipment matching |
Clean handling of non-hazardous materials |
Clean benches are mainly used for product protection and do not provide the personnel and environmental protection that biological safety cabinets have. When infectious materials, toxic volatiles, or other hazardous materials are involved, equipment should be selected based on the risk.
First record the tools, workpieces and personnel operating range required for each process, and then determine the number and total length of workstations. Shared tools, material staging and handover areas should also be factored into the layout.
Large work equipment, monitors or instruments should not block the direct air supply to key operating positions. Operations that may generate particles, such as unpacking and friction, should be arranged in conjunction with the direction of air flow and the location of sensitive workpieces.
Longer equipment requires confirmation of packaging dimensions, handling door openings, turning channels and on-site installation conditions.
When using segmented delivery, the connection, sealing, positioning and on-site inspection requirements should be clarified in advance, and the smoothness and support status of the table after installation should be checked.
Agree on the detection range at each work station, near the filter joints and at the actual operating position.
When the partition is running, the expected opening combination should be checked, and the detection results when all areas are turned on cannot be used instead of other operating states.
Keep the air inlet and filter outlet areas clear, and clean the countertop, side enclosures and workstation connection locations according to process requirements.
Schedule maintenance based on differential pressure, air velocity, cleanliness testing and filter status. After replacing the end filter, the installation seal and related performance should be rechecked.
Aili Industrial has a manufacturing base of approximately 30,000 square meters, covering R&D and manufacturing links such as motors, fans, control systems, sheet metal, air filters, and complete machine assembly.
For multi-person double-sided operation workbench projects, the filter layout, fan working point, long table support, process interface and operation control can be matched together to support non-standard design and batch project matching.
manufacturing link |
Project support |
|---|---|
Motors and fans |
Matching wide air supply, system resistance and operation requirements |
air filter |
Configure filter arrangement, sealing and replacement methods |
control system |
Match unified operation or partition control requirements |
Sheet metal and countertops |
Realize long table top, double-sided opening and process interface |
Complete machine assembly and testing |
Organize production and inspection according to confirmed drawings and technical requirements |
It is suitable for occasions such as multi-person collaborative assembly, wide-width workpiece operation, process connection on both sides or material handover, etc. that require access to the work area from both sides. The actual configuration needs to be confirmed based on the workpiece size, personnel movements and on-site space.
Personnel movements, material volumes, and external cross-air flows can all affect the work area. Actual usage conditions should be confirmed through reasonable layout, operating procedures and agreed testing.
Corresponding zoning structures and control schemes are required, and the impact of operating combinations on adjacent areas is checked.
The requirements can be put forward based on the workpiece size, load-bearing capacity, operating height and installation space, and the filter layout, table support and maintenance space can be checked simultaneously.
It should be evaluated according to actual process and management requirements. UV lamps cannot replace filtered air supply, cleaning and necessary testing; if optional, the usage procedures and protective measures should be confirmed at the same time.
Provide process information |
Confirm configuration plan |
|---|---|
Workpiece size, movements on both sides, number of operators |
Confirm valid workspace |
Cleanliness requirements, installation environment, maintenance conditions |
Confirm filtering and structure |
If multiple people are required to operate the clean workbench on both sides, the workpiece size, process description and on-site layout can be submitted to communicate the applicable size, filtration system and operating configuration.
→ Consult multi-station dimensions and layout → Submit artifacts and tool occupancy
→ Learn about filtering and running configuration → Communicate about non-standard and production line matching
pass Aili Industrial Technology Consulting , communicates product selection and customization needs.
Aili Industry - From core components to complete clean workbench machines, it provides products and technical support for multi-person collaborative assembly, precision inspection and wide-width workpiece operations.
