| Quantity: | |
|---|---|
Aili industrial LCD screen FFU control system is a set of small and medium-sized clean room projects . It uses LCD touch screens as on-site operation terminals. FFU centralized control solutions for A single LCD screen can control up to 300 FFUs.。
The system supports FFU partition control, group control and single unit control. It can perform centralized start and stop, duty control and operating parameter settings for FFU in different areas. It also provides functions such as communication status monitoring, fault code viewing and FFU reset.
According to the installation space and operation requirements of the clean room, the system provides 7-inch and 10-inch LCD touch screens . two specifications of For small and medium-sized clean rooms that need to centrally manage a large number of FFU equipment, the entire FFU system can be operated and viewed in a centralized manner through an LCD screen.
Aili Industry also has the production capacity of FFU, fans, motors, control systems, filters and other purification equipment. It can configure the system according to the number of FFU, regional division and control requirements in the project.
For small and medium-sized clean room projects, Aili industrial LCD screen FFU control system supports a single LCD screen to control up to 300 FFUs.
According to the actual layout of the clean room, the FFU can be divided into different areas, and each area can be centrally managed through the LCD touch screen. It also supports entering the single control mode to independently adjust the designated FFU.
Multiple control methods for partition, group and single unit
The system supports different levels of FFU management methods:
Zoning control: centralized operation of FFU according to clean room area
Group control: unified control of FFU within the same control group
Single unit control: independent speed adjustment for specified FFU
Status monitoring: Centrally view FFU operation and communication status
This control method is suitable for small and medium-sized projects with a large number of FFU and multiple clean areas at the same time.
For small and medium-sized clean rooms, when the number of FFUs increases, operating each unit will increase on-site management work.
The Aili industrial LCD screen FFU control system is based on centralized control and integrates the operation control and status information of multiple FFUs into the LCD touch screen.
A single LCD screen can control up to 300 FFU/EFU.
According to the clean room layout, FFU can be divided into different control areas. The operator selects the corresponding area through the LCD screen to view the FFU operating status of the area and perform corresponding control operations.
The system also retains the control function of a single FFU. When a certain device needs to be adjusted, it can enter the single control mode for independent operation.
Up to 300 FFU/EFU → Partition management → Group control → Single unit adjustment → Status monitoring → Fault diagnosis
This control method is suitable for small and medium-sized clean environments such as electronic manufacturing, medical equipment, precision manufacturing, food processing, laboratories, and biomedicine.
The system can divide FFU into regions based on the actual layout of the clean room.
The main interface of the LCD screen provides corresponding partition buttons. After the operator clicks on the area, he can enter the area to view the FFU operating status and control it.
Different operating states are distinguished by indicator lights:
Indicate status |
FFU running status |
|---|---|
green |
Power on |
yellow |
on duty |
grey |
Shut down |
Through partition management, FFU control can be organized according to production areas, clean areas or equipment areas, making on-site operations clearer.
After entering the corresponding area, you can set the area parameters according to the actual operation requirements of the project.
System support settings:
Number of regional FFU
Working speed
duty speed
duty time period
Duty activation time
Regional operating mode
Among them, the duty speed can be set according to the percentage of the FFU maximum speed.
After completing the parameter settings, the system automatically saves the relevant parameters and returns to the main interface.
In this way, settings can be made according to the operational needs of different areas before the system is put into operation.
The LCD screen FFU control system supports multiple operating modes.
Perform centralized power-on operation for FFU in the selected area or control group.
During non-production periods, FFU can be run according to the set duty parameters.
Perform shutdown operations on the corresponding area or control group.
The center of the LCD screen interface can display the overall operating status of the FFU in the current area, allowing the operator to quickly understand the operating status of the current area.
In addition to controlling FFU by area, the system can also perform group management based on project control logic.
FFU in the same control group can be operated uniformly, which is suitable for projects with multiple equipment areas, production areas or functional areas in the clean room.
pass:
Area → Group → Single FFU
Level-by-level management can meet FFU control needs at different levels.
When it is necessary to adjust a certain unit or a group of specific FFUs, the regional operating mode can be switched to **'Single Control' mode**.
User input:
starting address
Termination address
target speed
Then click 'Start' to set the speed of the FFU within the corresponding address range.
This feature is available for:
FFU installation and debugging
Single device parameter adjustment
Wind speed adjustment in specific areas
Equipment maintenance
Operation parameter adjustment
On the basis of centralized control, the adjustment function of a single unit is retained, so that the system can meet the needs of daily operation and equipment debugging at the same time.
The LCD screen FFU control system can centrally check the communication status of each FFU.
In the communication monitoring interface, the system displays the communication status according to the FFU number.
When a certain FFU has a communication abnormality or goes offline, the status indication of the corresponding number will change. Maintenance personnel can quickly find the device that may have communication problems based on the FFU number.
For clean rooms where multiple FFUs operate centrally, this centralized viewing method can provide intuitive information for on-site equipment maintenance.
When an abnormality occurs in the FFU, the operator can enter the 'Error Code' function through the LCD screen to view the FFU fault information in the corresponding area.
Normally, the error code is displayed as 0.
When FFU generates a corresponding exception, the system displays the corresponding error code based on device feedback to facilitate further inspection by maintenance personnel.
The system also provides the 'Reset FFU error reporting' function. Users can enter the corresponding FFU number to perform a reset operation on devices that support this function.
Abnormality found → Check FFU number → Check error code → Check device → Perform reset
Centralized display of fault information on the LCD screen facilitates on-site personnel in equipment management and maintenance.
Aili industrial LCD screen FFU control system provides 7-inch and 10-inch .two LCD touch screen specifications:
The 7-inch touch screen adopts 800×480 resolution and is relatively compact in size. It is suitable for control cabinets, wall control boxes and sites with limited installation space.
The touch life is no less than 1 million times and is suitable for daily operation in clean rooms.
The 10-inch touch screen has a larger display area and is suitable for application scenarios that require viewing more FFU operating status, regional information and system data.
For projects with a large number of FFUs, a larger operation interface also facilitates on-site personnel to check status and operate functions.
project |
7-inch LCD screen |
10-inch LCD screen |
|---|---|---|
screen size |
7 inches |
10 inches |
7-inch screen resolution |
800×480 |
- |
Operation mode |
Touch operation |
Touch operation |
Applicable features |
Limited control space |
Requires larger display area |
Typical installation |
Control cabinet, control box |
Control cabinet, wall operating position |
Selection basis |
Installation space |
Display and operation requirements |
The specific screen configuration can be determined according to the actual needs of the project.
The LCD screen FFU control host has the ability to operate independently.
When the system is not configured with a computer, or the computer is turned off, the control host can still complete the relevant settings and control of FFU according to the system configuration.
This enables the LCD screen not only to serve as a display terminal, but also as an operating interface for the on-site FFU system in the clean room.
The system also has a login protection mechanism that automatically logs out after 5 consecutive minutes of no operation , reducing the situation where non-operators directly enter the control interface.
The LCD screen FFU control system is mainly designed for small and medium-sized clean rooms that need to centrally manage multiple FFUs.
It is suitable for clean areas such as SMT workshops, electronic assembly, precision electronic production, and component production.
It is suitable for clean production environments such as medical device assembly and disposable medical consumables production.
Suitable for clean food packaging, clean processing areas, central kitchens and other applications.
Suitable for precision molds, optical components, instruments and other production areas that have requirements for environmental conditions.
It is suitable for university laboratories, clean rooms of scientific research institutions and experimental production spaces.
Suitable for small GMP production areas, cell culture rooms and related clean environments.
Designed for small and medium-sized clean room projects, a single LCD screen can control up to 300 FFUs。
Divide control areas according to the actual layout of the clean room, and independently manage FFU in different areas.
FFU control groups can be established according to project control requirements to achieve centralized operation of corresponding equipment.
After entering the single control mode, independent speed settings can be performed for the specified FFU.
Centrally view FFU startup, duty, shutdown and communication status.
View FFU error codes on the LCD screen to provide information support for equipment maintenance.
Select LCD screen specifications based on installation space and on-site operation requirements.
The control host can independently complete the corresponding control functions without a computer or the computer is shut down.
Aili Industry has the production capacity of fans, motors, control systems, sheet metal, filters, FFU and other purification equipment, and can provide product matching according to project needs.
Parameter items |
Configuration instructions |
|---|---|
Product name |
LCD screen FFU control system |
product type |
FFU centralized control system |
Applicable items |
Small and medium-sized clean room projects |
Maximum number of controls on a single screen |
300 FFU |
LCD screen specifications |
7 inches/10 inches |
7-inch screen resolution |
800×480 |
Operation mode |
LCD touch operation |
Control method |
Partition control, group control, single unit control |
operating mode |
Power on, power off, on duty |
Working speed setting |
support |
Duty speed setting |
support |
Duty time settings |
support |
Single FFU speed regulation |
support |
Communication status monitoring |
support |
Error code view |
support |
FFU error reset |
support |
Run independently |
support |
Automatically log out |
No operation for 5 minutes |
Number of FFU |
Up to 300 units per screen |
System configuration |
Configure according to project needs |
Note: The above functions and configurations are subject to the actual control system solution and supporting FFU model.
When choosing an LCD screen FFU control system, you can focus on confirming the following items.
First confirm the number of FFU that needs to be controlled centrally for the project. A single LCD screen supports up to 300 FFU controls.
Determine the number of FFU partitions and control methods according to the clean room layout.
Confirm whether the project requires regional control, group control, single unit speed adjustment, communication monitoring and other functions.
Choose 7-inch or 10-inch LCD screen according to the control cabinet or on-site installation location.
Confirm the matching FFU model and its communication and control functions to determine the complete system configuration.
Configure the control plan according to whether the project requires computers, on-site touch screen operation and independent operation.
Small and medium-sized clean rooms usually have the characteristics of a relatively concentrated number of FFU, clear control areas, and direct on-site operations.
The LCD screen FFU control system integrates FFU centralized control, regional management and equipment status display into one operation terminal.
Up to 300 FFU + partition management + group control + single unit adjustment + status monitoring
It can cover the FFU centralized control needs of many small and medium-sized clean rooms.
For projects with different FFU quantity, area division or control requirements, the system configuration can be carried out according to the actual situation.
A single LCD screen can control up to 300 FFUs , which is suitable for small and medium-sized clean room projects.
Can. The system supports partition control, and FFU can be divided into different areas for management according to the actual layout of the clean room.
Can. After entering the 'single control' mode, you can set the target speed of the corresponding device according to the FFU address.
support. The system can set the duty speed, duty time period and duty activation time, and perform duty control according to the set parameters.
Can. The system provides a communication status monitoring interface, and you can check the communication status according to the FFU number.
You can enter the error code interface to view the fault information corresponding to the FFU. For devices that support the reset function, you can enter the FFU number to perform the corresponding reset operation.
If the on-site control cabinet space is limited, you can consider a 7-inch screen; if you need a larger display area and operation interface, you can choose a 10-inch screen.
The control host has the ability to operate independently. When the computer is not configured or the computer is shut down, the corresponding FFU control function can be completed according to the system configuration.
Can. Aili Industrial can provide FFU and supporting control systems, and configure them according to the number of FFU, regional division and control requirements of the project.
Can. Aili Industrial can design the solution based on the number of FFU, control area, installation space, operation requirements and on-site system configuration.
The LCD screen FFU control system is a control system for centralized management of multiple FFUs in clean rooms. It can perform partition control, group control and single control of FFU through the LCD touch screen, and can view the FFU operating status, communication status and fault codes.
It mainly includes functions such as FFU partition control, group control, startup, shutdown, duty operation, working speed setting, duty parameter setting, single FFU adjustment, communication status monitoring, fault code viewing and FFU reset.
Available in 7-inch and 10-inch LCD touch screen specifications. The 7-inch screen uses 800×480 resolution and is suitable for control locations with limited installation space; the 10-inch screen is suitable for applications that require a larger display area.
Mainly suitable for small and medium-sized clean rooms, including electronic manufacturing, medical equipment, food processing, precision manufacturing, scientific research laboratories, biomedicine and other application scenarios.
Aili Industrial has long been engaged in the research, development and production of purification equipment and related products, with a production base of approximately 30,000 square meters.
Company product coverage:
Fan → Motor → Control system → Sheet metal → Filter → FFU → Purification equipment
In the FFU project, FFU and control system matching can be provided according to actual needs, including LCD screen FFU control system, FFU equipment, fans, motors, filters and other related products.
This product matching method is suitable for clean room projects that require unified selection of FFU equipment and control systems.
If your clean room needs to centrally manage multiple FFUs, you can provide the following project information to Aili Industrial:
Number of FFU
Clean room area
FFU layout
Number of control areas
FFU model
7-inch or 10-inch LCD screen requirements
Do you need single unit control?
Whether communication monitoring is required
Do you need troubleshooting?
Do you need to run independently?
Aili Industrial can provide corresponding FFU and LCD screen control system configuration solutions based on actual project conditions.
