AIR MOVEMENT · MOTORS & DRIVES
Selection and customization of EC centrifugal fans, impellers, motors and drive controls.
Aili Industry provides power components for FFU, EFU, air showers, clean workbench and air treatment equipment, and supports component procurement, replacement of existing fans and OEM matching.
Determine the working point based on the required air volume and pressure, and then select the configuration based on the installation space, power supply and speed adjustment method. When it is necessary to design the filter, box and control together, in-house R&D and manufacturing personnel can participate.
If there are no drawings, parameters or technical information, you are welcome to explain the purpose and usage environment first. We can assist in selection and design with our rich experience.
Volute fans and impeller motor assemblies are installed differently. You can first understand the corresponding series according to the equipment air duct and structural space, and then determine the specific model.
The volute integrates the centrifugal impeller and motor, which is suitable for selection in combination with the internal air duct of the equipment. Focus on confirming the exit direction, mounting bracket and drive configuration.
Compact equipment air ducts, local air supply and replacement packages
Consult the EC143 series configuration ofThe metal volute and air outlet flange are matched with the motor. Different suffixes correspond to different motor and drive configurations, which need to be identified with the complete model number.
Equipment air supply, flange connection and PWM supporting requirements
Consult the EC190 series configuration of
The combination of impeller, motor and controller can be selected around the space, filter resistance and operating speed of FFU and other purification equipment.
FFU power components, equipment boxes and filtration accessories
Consult EC315 series configuration of
The impeller, motor, mounting plate and controller are combined according to the specific model. The mounting plate, guide structure and box air path should be considered together.
Purification air supply unit, power components and complete machine research and development supporting equipment
Consult EC400 series configurationThe series name is used to find the product, and the full model number and its suffix are used to identify the configuration. The display diagram illustrates the product or component form, and the actual scope of supply is determined by the confirmed drawings and configuration orders.
The following table lists some existing sample configurations to facilitate identification of series and model suffixes. The air volume and pressure need to be selected separately based on the corresponding curve and the actual working point.
| Series | complete model | sample power supply | sample power (W) | matching controller | speed regulation mode |
|---|---|---|---|---|---|
| EC143 | AILIGY-EC143H103N8P1A-1 | 220V/50Hz | 75 | YJ-19A | Stepless speed regulation |
| EC190 | AILIGY-EC190H86N8P1A-2 | 220V/50Hz | 90 | XF-19-40S | PWM |
| EC190 | AILIGY-EC190H86N8P1A-2B | 220V/50Hz | 35 | XF-12-20S | PWM |
| EC315 | AILIGY-EC315H68N8P1A-1A | 220V/50Hz | 55 | EC315-1300 | Stepless speed regulation |
| EC315 | AILIGY-EC315H68N8P1A-1F | 220V/50Hz | 118 | EC315-1500 | Stepless speed regulation |
| EC400 | AILIGY-EC400H68N8P1A-1 | 220V/50Hz | 100 | EC400-1100 | Stepless speed regulation |
The power column follows the sample label value and does not infer the equipment power consumption or motor shaft output based on this. When ordering, Aili Industrial will provide confirmation information of the corresponding model, and clearly define the power supply, power caliber, drive and terminals.
After the fan is installed in the equipment, the actual air volume depends on the combination of fan performance and system resistance. Restricted air intake, elbows, filters and internal shielding will all cause changes in operating conditions.
First explain the target air volume and the pressure conditions that need to be overcome at this air volume. The maximum air volume and maximum pressure usually correspond to different states and cannot be combined into a rated operating point.
Static pressure, total pressure and static pressure available outside the whole machine should be stated separately. The pressure data on the curve needs to correspond to the equipment's air inlet and outlet connections, measurement location and test status.
| The influence of the conditions that need to be explained | on the selection of | Aili Industrial Support Confirmation |
|---|---|---|
| of Filtration and Air Path | The actual air volume is affected by resistance, air duct and box structure during the initial and maintenance stages of the filter. | Select the power configuration based on the target operating point, and consider |
| the operation and measurement range of the operating adjustment range. | Power supply, speed or control settings, air conditions and test boundaries affect data comparability | Performance curves, input power and noise data provide |
| replacement and modification according to corresponding models and conditions. | The same size and power do not mean the same performance. Existing equipment may also have local air intake restrictions. | Evaluate replacement direction based on legacy model, field structure, and usage issues |
If there is no air volume or pressure data for the time being, you can first explain the purpose of the equipment, the existing fans and the problems you want to solve. Aili Industry will assist in sorting out the selection criteria.
Fan speed regulation involves not only the motor and drive, but also the control logic of the customer's equipment. When confirming an interface, you should also look at the power supply, signal definitions, and actual operation.
Impeller load, target speed, start-stop method and operating period all influence motor selection. The motor rated parameters, drive capacity and operating point input power should be confirmed separately.
EC describes the electronic commutation method, and it cannot be judged based on this that the input must be low-voltage DC. The sample configuration listed on this page indicates 220V, 50Hz, and the actual input is based on the driver and wiring information of the model.
| Interface requirement | confirmation content |
|---|---|
| PWM or analog speed regulation | Control voltage, PWM frequency and duty cycle range, signal common terminal, speed response and signal loss status |
| start, stop and running feedback | Start/stop logic, form of operation or fault feedback, electrical ratings, and handling of equipment master control |
| RS485 communication with equipment | Interface electrical definition, protocol, address, baud rate and data table; the same connector appearance does not mean compatibility with |
| single machine, group or whole machine control | Aili Industrial evaluates the controller, wiring harness and software matching scope based on the number of equipment and usage methods. |
When 0–10V, PWM, RS485 or other interfaces are required, please describe the device control requirements. Functions and interfaces are evaluated based on the selected model and are not considered standard for every fan.
Overall dimensions are only part of the installation conditions. If the fan is too close to the box, the diversion structure is inappropriate, or the fixing method is changed, air supply, noise and vibration may be affected.
| parts | Points of concern when installing and replacing |
|---|---|
| : the air inlet and guide ring | Maintain an appropriate space on the air inlet side; the guide ring matches the impeller inlet, and the position and clearance are determined according to the drawings to confirm |
| the air outlet and connection. | The air outlet direction, flange, air duct section and adjacent turns of the volute, together with the actual equipment air path, are used to evaluate |
| the connection between the motor and the impeller. | The shaft end, mounting hole, fastening, rotation direction and rotation clearance are corresponding to avoid selecting based only on appearance. |
| supports and vibrations | Support stiffness, fixed points, vibration damping parts and transportation fixation are designed according to the equipment structure. After trial installation, check the operating status |
| of the drive heat dissipation and wiring harness. | Reserve space for heat dissipation, wiring, fixation and maintenance of the controller, and |
| arrange maintenance and subsequent replacement of power supply and control lines according to corresponding data. | Confirm the removal direction, tool space, cable disconnection position and replacement model identification method |
Aili Industrial can carry out non-standard assessments focusing on equipment installation, operation objectives and procurement scope, and support the matching of fans, motors and related control components.
Discuss the supporting structure around the equipment opening, volute outlet, mounting plate, fixing method and wiring harness path, taking into account assembly and subsequent disassembly.
Evaluate the impeller, motor, speed and drive combination based on the target air volume, pressure and operating mode, and review the performance simultaneously when the structure changes.
Correlate speed regulation, start-stop, and operation feedback with main equipment signals, and clarify the interfaces between fans, controllers, wiring harnesses, and customer equipment.
Discuss prototypes, trial assembly and verification arrangements as needed, and use confirmed drawings, configurations, markings and inspection requirements for subsequent manufacturing.
When you need to purchase motors, impellers or control components separately, you are also welcome to contact Aili Industrial to explain the scope of supply. There are no drawing parameters, so you can start with the actual use.
Aili Industrial has a manufacturing base of 30,000 square meters. Its R&D and manufacturing cover motors, fans, control system software and hardware, air filters, sheet metal processing, complete machine assembly and testing. For power component matching, these links can work together around the same equipment requirements.
The selection of motor and impeller revolves around the same operating point. When changes in speed, drive or structure occur, the impact on performance and installation can be directly assessed.
When matching FFU, EFU or air treatment equipment, the filter resistance, air supply area, fan position and maintenance structure are jointly determined to reduce the number of components and then adjust the interface after each component is selected.
Equipment and control personnel jointly confirm speed control signals, operating logic, fault feedback and communication requirements to facilitate the implementation of prototype adjustments into actual components and software.
Using the same set of validation data internally for part, sheet metal, and assembly changes helps reduce turnaround waits and retests. Configuration comparisons take into account component procurement, assembly man-hours and ongoing maintenance.
The same series of fans installed in different equipment may have different air paths, filter resistance, operating settings and maintenance conditions. Selection needs to be based on specific equipment conditions.
The working point is determined based on the filter resistance, box air path and air supply area, and then connected to single machine or group operation.
Pay attention to the installation height, equipment openings, internal shielding, key air supply locations and main equipment control interfaces.
According to the corresponding air duct, work area air supply and start-stop operation requirements, noise, maintenance and structural installation are assessed respectively.
The selection is based on filtration and other functional sections, pipeline connections, equipment space and external requirements, and the overall machine performance is confirmed based on the complete configuration.
This page focuses on fans, motors and drive components. When you need a complete clean air supply or air treatment equipment, you can learn more about the corresponding products and confirm the supply boundary with Aili Industrial.
There is no need to prepare all the information before starting a consultation. Existing labels, photos, curves or drawings can be sent via WeChat 905745196 or email nancy@ailigy.com ; Ailigy Industry will provide feedback on selection or design suggestions based on the actual environment and needs.
The following instructions are for preliminary selection and communication. When it comes to specific wiring, size and performance, please refer to the confirmation information of the corresponding model.
You can contact Aili Industrial to explain the required parts and usage. Independent components need to be evaluated based on conditions such as shaft end, fixation method, load, power supply and drive, and can also be matched with the controller and installation structure.
EC describes the electronic commutation method, and the input power depends on the specific drive configuration. The samples listed on this page are 220V, 50Hz. The wiring should be confirmed according to the corresponding model information. You cannot judge based on the name 'DC' or 'EC' alone.
May correspond to motor, speed, power, drive or other configuration changes. When replacing, it is recommended to use complete model identification and judge based on curves, installation diagrams and interface data. Do not just compare series names such as EC143 and EC315.
It depends on whether they belong to the same working point on the same curve. The maximum air volume and maximum pressure usually correspond to different states, and the model should be selected based on the corresponding pressure under the target air volume and actual test conditions.
The air volume also depends on the impeller, rotation speed, air path and system resistance. After changing the motor or drive, you need to re-evaluate the connection structure, working point and operating status. You cannot judge based on the power alone.
You can explain the signal and operation requirements of the main equipment to Aili Industrial, and we will evaluate the controller and wiring harness according to the specific model. Signal voltage, PWM frequency, communication protocol, terminal definition and feedback logic need to be confirmed separately and are not uniformly standard for all models.
Electrical definitions and control logic need to be checked. Pins, signal levels, protocols, power and loss of signal status may be different, and the same connector appearance does not mean direct compatibility.
You can first send photos of the label, appearance, installation location and wiring, and describe the current usage. If you don’t have these information, you can contact us first and Aili Industrial will help sort out the conditions you need to know later.
Contact Aili Industrial to explain the proposed series or equipment usage. We will provide corresponding information based on the specific configuration and confirm the model suffix, curve conditions, installation interface and wiring version. WeChat 905745196, email nancy@ailigy.com .
The evaluation can be carried out based on the working point, installation space, air path, power supply and control requirements. Motor, fan, control, filter and structural personnel can participate together to discuss samples, trial assembly and batch matching as needed.
sure. Just talk about where the equipment is used, the actual environment and the problems you want to solve. Aili Industry will combine its rich R&D and manufacturing experience to help sort out power configuration and interface requirements, and assist in selection and design.
The electrical input power should be compared under the same target air volume, pressure caliber and corresponding operating conditions, and the speed adjustment method and operating period should be considered. Nameplate power or no-load status cannot alone represent the power consumption of the equipment during use.
You can contact us for the purchase of standard products, replacement of existing parts, non-standard design and OEM batch matching.
Even if there are no drawings, parameters or technical information, you can first introduce the actual use environment and requirements. Aili Industry will rely on its rich R&D and manufacturing experience to help sort out the selection conditions and provide feedback on model, installation or control supporting suggestions.
