How to confirm if the airflow arrow of the chemical filter is not clear?
If the airflow arrow of the chemical filter is unclear, you should confirm with the product provider based on the corresponding model description and installation interface. It cannot be inferred based on the color of the filter material, the appearance of the front and back, or the old installation direction. In particular, the order of composite filter layers needs to be clear.
Check product identity first
Keep the model number, batch, frame photo and media category to confirm whether it is a single-layer or composite structure. Different configurations may have different installation requirements.
Distinguish direction and sealing interface
The arrow points to the direction of air flow, and the gasket position is also affected by the frame and compression method. The two need to be checked together, and the entire structure cannot be judged based on the gasket alone.
Keep records after confirmation
Match the directional instructions with the installation location and add clear markings if necessary. Check the status of the compression, bypass and filter layers before putting it into operation.
Project judgment example
When the label of the composite filter element is blurry, you can stay in the waiting state for installation, obtain the orientation instructions of the model, and then confirm the order of the filter layers.
Selection check points
Write the following four items into the evaluation record to facilitate product comparison, trial and subsequent review using the same conditions.
| for inspection items | Confirm key points | for inspection items | Confirm key points |
|---|---|---|---|
| Model information | Identify the actual configuration | Directions | Obtain clear basis |
| Sealing interface | Check frame compression | Installation record | Keep location and identity |
Aili Industrial products and equipment supporting
Aili Industrial provides a series of chemical filter products and related clean air equipment. You can compare FFU matching, box-type, flat-type and V-type products based on the target gas and installation location, and then check the air volume, resistance and related detection conditions. Aili Industrial's R&D and production of motors and fans, control systems, sheet metal, filters and complete machine assembly capabilities can be used to configure the connection between the filter section and the air supply equipment; the specific gas applicability and performance still need to be confirmed based on the model, filter material and usage conditions.
Related products:Chemical filter product series ; more solutions can be viewedChemical filter series . First clarify the pollution and protection goals → then check the product conditions → finally verify the on-site effect.
summary
If the airflow arrow of the chemical filter is unclear, you should confirm with the product provider based on the corresponding model description and installation interface. It cannot be inferred based on the color of the filter material, the appearance of the front and back, or the old installation direction. In particular, the order of composite filter layers needs to be clear.
